Tout nos connecteurs noirs sont résistants à la corrosion.
Ensemble de coin noir
$3.79 – $4.50
- HJ-2K est un ensemble de connecteurs en coin métallique peint en noir qui se compose de (x1) H-2, (x1) H-3K, (x2) boulons M6-25B (x2) écrous M6-N
- Couramment utilisé pour les coins, HJ-2K crée une intersection de trois tubes lorsqu’ils sont combinés avec les tubes de 28mm avec juste une clé Allen de 5 mm
- Ceci est un choix idéal lors de tables et rendant toute structure en forme de cube
- Peinture E-coated pour une finition durable qui résiste aux environnements extérieurs
- Pièce détachée 100% reutilisable
- Peut être utilisé avec des conduits EMT 3/4″ grâce au EMT-ADPTR34
Poids | 0.5 livres |
---|---|
Utilisation prévue | Pour des conduits EMT (3/4 po), Pour des tubes tinktube (1 1/16 po) |
Longueur | 2 9/16 in (65 mm) |
Largeur | 1 5/16 in (33 mm) |
Épaisseur de l'acier | 1/8 in (2.5 mm) |
Matériel | Acier roulé à chaud (SPHC) |
Traitement de l'acier | Électrodéposition cathodique noir (Ecoating) |
Fini | Brillant |
Réutilisable | Oui |
Résistance UV | Haute |
Résistance à la corrosion | Haute |
Recyclable | Oui |
Température de fonctionnement du système | -148°F to 572°F (-100°C to 300°C) |
Compatibilité avec tube EMT de 3/4″de pouce | Oui, avec un EMT-ADPTR34 |
Compatibilité avec tube EMT de 1/2″de pouce | Non |
Compatibilité avec tube EMT de 1 pouce | Non |
33 avis pour Ensemble de coin noir
Show only reviews in Français (19)
Vous devez être connecté pour publier un avis.
Téléchargez la bibliothèque de fichiers 3D en format Step pour dessiner votre projet tinktube dans votre logiciel de CAO préféré
Pascal Leduc (client confirmé) –
Ontario, Canada
Brett (client confirmé) –
Ontario, Canada
Dominique Duchesne (client confirmé) –
Quebec, Canada
Louis –
Quebec, Canada
Maxime P. (client confirmé) –
Quebec, Canada
Pierre (client confirmé) –
Canada
Anonyme (client confirmé) –
Quebec, Canada
Etienne B. –
Quebec, Canada
Bien solide pour mes besoins!
Pierre Guernier (client confirmé) –
Yves Bouchard (client confirmé) –
Andrew S. (client confirmé) –
Great for my bunk project. Looks strong.
juvenal cerda (client confirmé) –
excellent
Thomas (client confirmé) –
Great product! Easy to assemble and disassemble if you want to repurpose. Holds tight and creates a strong joint.
Guy B. (client confirmé) –
Michel Croteau (client confirmé) –
Andrew (client confirmé) –
Eoin (client confirmé) –
Marc-André Pronovost (client confirmé) –
Mike J. (client confirmé) –
Brent (client confirmé) –
A bit tricky to use at first (all three pipes need to be in place to tighten/position), but once you get the hang of it, this is a very versatile piece.
Minh Huynh (client confirmé) –
Anonymous (client confirmé) –
Anonymous (client confirmé) –
The bolts provided are just ever so slightly too short for these to work with standard 1 – 1/16″ (OD) EMT tubing. I had to use channel grip pliers to squeeze the ends together while threading the bolt into the nut. The provided nuts have a small threaded extension to provide greater grip, but because the bolts are so short, that thin walled threaded extension on the nut is in tension before the bolt has threaded all the way into the nut. This caused the nut to snap on several attempted installations on several different types of connectors. This would be remedied if the provided bolts were a mere 1/4″ longer.
Éric (store manager) –
Thank you for your review. I’m very sorry that you had a bad experience connecting tinktube on a 1″ EMT tubing. Our connectors and accessories are 100% compatible with our 1-1/16″ tinktube pipes but not with the standard 1″ EMT conduit that you’ll find at hardware store. We will do a better job on explaining it on our Website, thanks to your comment. Please contact us at [email protected] to try our 1-1/16″ galvanized pipe which is cheaper inch for inch than a standard 1″ EMT conduit.
Nicolas B. (client confirmé) –
Etienne Breton (client confirmé) –
Très bien.
Bertrand (client confirmé) –
Bonjour, je suggère d’avoir une procédure, dès étapes détaillées avec conseils comme vérifier les diagonales lors de construction d’un carré, comment s’installer, par quoi commencer. Plus d’échange à savoir que voulez-vous faire? Qu’allez-vous installer avec les dimensions? Des suggestions et conseils pour simplifier le plan à savoir moins de raccords. Esteban a bien utilisé le logiciel pour le plan. Merci Bertrand
Jace (client confirmé) –
Francis T. (client confirmé) –
Good solid clamp.
Marc Fiset (client confirmé) –
Noel C. (client confirmé) –
We bought these to build a budget friendly DIY Golf Simulator for the kids. They are solid, low profile and easy to use. The kids will enjoy playing golf through the winter. We will be upgrading with other Tinktube parts to make it foldable for storage.
Michael Pratt (client confirmé) –
Daniel (client confirmé) –
Fait un bel ange droit.
Michael (client confirmé) –
Martin B. (client confirmé) –