HJ-6

Ensemble angle pivotante noir

(17)
(17 avis client)

$4.97$5.44

  • HJ-6 est un ensemble de connecteurs métallique peint en noir pivotant qui est composé de (2x) H-5 (x2), H-6, (x2) boulons M6-25B (x2) écrous M6-N
  • Réglable de 0 degrés à 180 degrés
  • Peinture E-coated pour une finition durable qui résiste aux environnements extérieurs
  • Pièce détachée 100% reutilisable
  • Peut être utilisé avec des conduits EMT 3/4″ grâce au EMT-ADPTR34
En stock, expédié le lendemain!
Quantity
Social
Social
Poids 0.49 livres
Utilisation prévue

Pour des conduits EMT (3/4 po), Pour des tubes tinktube (1 1/16 po)

Longueur en pouce

3 1/8 po (79 mm)

Largeur en pouce

1 5/16 po (33 mm)

Hauteur en pouce

1 5/16 in (33mm)

Épaisseur de l'acier

1/8 in (2.5 mm)

Matériel

Acier roulé à chaud (SPHC)

Traitement de l'Acier

Électrodéposition cathodique noire (Ecoating)

Finit

Brillant

Réutilisable

Oui

Résistance UV

Haute

Résistance à la corrosion

Haute

Recyclable

Oui

Température de fonctionnement du système

-148°F to 572°F (-100°C to 300°C)

Compatibilité avec tube EMT de 3/4″de pouce

Oui, avec un EMT-ADPTR34

Compatibilité avec tube EMT de 1/2″de pouce

Non

Compatibilité avec tube EMT de 1 pouce

Non

17 avis pour Ensemble angle pivotante noir

  1. Anglais
    (17)

    ERIC H. (client confirmé)

    usPennsylvania, United States

    Great product, easy to use and well made

  2. Anglais
    (17)

    sebastien L. (client confirmé)

    caQuebec, Canada

  3. Anglais
    (17)

    Todd Hansen (client confirmé)

  4. Anglais
    (17)

    Jordan Reimer (client confirmé)

    These are great! A little bit awkward when you are getting them set up but allow for amazing flexibility!

  5. Anglais
    (17)

    Hélène Birade (client confirmé)

  6. Anglais
    (17)

    Dominique D. (client confirmé)

  7. Anglais
    (17)

    Andrew S. (client confirmé)

    I bought the wrong piece but I can swap half of this to make an adjustable angle which will work for my needs.

  8. Anglais
    (17)

    Garrett G. (client confirmé)

    Good quality product, works perfect for what I was wanting to do. Fit great on 1” EMT conduit, will be ordering some more to complete my greenhouse project.

  9. Anglais
    (17)

    JERRY CASHMORE (client confirmé)

    Built a 10×32 greenhouse. Used Derrick rods of solid fibreglass, 1 inch diameter. All of these tinktube fittings were awesome. Had to use some emt shims, some full, some I cut in half, everything worked out. Now I just have to figure out what to do with all the extra tinktube parts I have…retinkable, lol

  10. Anglais
    (17)

    Keith (client confirmé)

    Works as described
    The whole system is widely adaptable, strong and easy to work with.

  11. Anglais
    (17)

    Anonymous (client confirmé)

  12. Anglais
    (17)

    Mark Daigneault (client confirmé)

  13. Anglais
    (17)

    Anonymous (client confirmé)

    The bolts provided are just ever so slightly too short for these to work with standard 1 – 1/16″ (OD) EMT tubing. I had to use channel grip pliers to squeeze the ends together while threading the bolt into the nut. The provided nuts have a small threaded extension to provide greater grip, but because the bolts are so short, that thin walled threaded extension on the nut is in tension before the bolt has threaded all the way into the nut. This caused the nut to snap on several attempted installations on several different types of connectors. This would be remedied if the provided bolts were a mere 1/4″ longer.

    • Anglais

      Éric (store manager)

      Thank you for your review. I’m very sorry that you had a bad experience connecting tinktube on a 1″ EMT tubing. Our connectors and accessories are 100% compatible with our 1-1/16″ tinktube pipes but not with the standard 1″ EMT conduit that you’ll find at hardware store. We will do a better job on explaining it on our Website, thanks to your comment. Please contact us at [email protected] to try our 1-1/16″ galvanized pipe which is cheaper inch for inch than a standard 1″ EMT conduit.

  14. Anglais
    (17)

    David S. (client confirmé)

    I truly love these fittings, many future projects in mind.

  15. Anglais
    (17)

    Jonathan (client confirmé)

  16. Français
    (17)

    Jonathan Pelletier (client confirmé)

    Un peu difficile à assembler compartiment aux autres connecteurs. Mais fait très bien le travail une fois assemblé.

  17. Anglais
    (17)

    Gene G. (client confirmé)

Show only reviews in Français (1)

Ajouter un Avis

Téléchargez la bibliothèque de fichiers 3D en format Step pour dessiner votre projet tinktube dans votre logiciel de CAO préféré

Vous aimerez peut-être aussi…

Social

Social

Scroll to Top