Tout nos connecteurs noirs sont résistants à la corrosion.
Ensemble 45 ° angle fixe noir
$3.03 – $3.47
- HJ-17 est un ensemble de connecteurs métallique peint en noir qui se compose de (x1) H-17, (x1) H-18, (x1) boulon M6-25B (x1) écrou M6-N
- Crée un angle de 45 ° fixe
- Idéal pour le renforcement des structures
- Peinture E-coated pour une finition durable qui résiste aux environnements extérieurs
- Pièce détachée 100% reutilisable
- Peut être utilisé avec des conduits EMT 3/4″ grâce à l’AO-SHIM
En stock, expédié le lendemain!
Poids | 0.32 livres |
---|---|
Utilisation prévue | Pour des conduits EMT (3/4 po), Pour des tubes tinktube (1 1/16 po) |
Longueur en pouces | 3 3/16 po (81 mm) |
Largeur en pouces | 1 5/16 po (33 mm) |
Hauteur extérieure en pouces | 2 1/8 po (54mm) |
Épaisseur de l'acier | 1/8 po (2.5 mm) |
Matériel | Acier roulé à chaud |
Traitement de l'acier | Electrodéposition cathodique noire (Ecoating) |
Finit | Brillant |
Réutilisable | Oui |
Résistance UV | Haute |
Résistance à la corrosion | Haute |
Recyclable | Oui |
Température de fonctionnement du système | -148°F to 572°F (-100°C to 300°C) |
Compatibilité avec tube EMT de 3/4″de pouce | Oui, avec un EMT-ADPTR34 |
Compatibilité avec tube EMT de 1/2″de pouce | Non |
Compatibilité avec tube EMT de 1 pouce | Non |
5 avis pour Ensemble 45 ° angle fixe noir
Show only reviews in Français (0)
Vous devez être connecté pour publier un avis.
Téléchargez la bibliothèque de fichiers 3D en format Step pour dessiner votre projet tinktube dans votre logiciel de CAO préféré
Todd Hansen (client confirmé) –
Dominique D. (client confirmé) –
juvenal cerda (client confirmé) –
excellent
Anonymous (client confirmé) –
Anonymous (client confirmé) –
The bolts provided are just ever so slightly too short for these to work with standard 1 – 1/16″ (OD) EMT tubing. I had to use channel grip pliers to squeeze the ends together while threading the bolt into the nut. The provided nuts have a small threaded extension to provide greater grip, but because the bolts are so short, that thin walled threaded extension on the nut is in tension before the bolt has threaded all the way into the nut. This caused the nut to snap on several attempted installations on several different types of connectors. This would be remedied if the provided bolts were a mere 1/4″ longer.
Éric (store manager) –
Thank you for your review. I’m very sorry that you had a bad experience connecting tinktube on a 1″ EMT tubing. Our connectors and accessories are 100% compatible with our 1-1/16″ tinktube pipes but not with the standard 1″ EMT conduit that you’ll find at hardware store. We will do a better job on explaining it on our Website, thanks to your comment. Please contact us at [email protected] to try our 1-1/16″ galvanized pipe which is cheaper inch for inch than a standard 1″ EMT conduit.