Tout nos connecteurs noirs sont résistants à la corrosion.
Ensemble angle pivotante prolongées noir
$6.53 – $6.97
- HJ-6A est un ensemble de connecteurs métallique peint en noir de pivotement étendu qui est composé de (2x) H-6, (x2) H-6A, (x2) boulons M6-25B (x2) écrous M6-N
- Réglable de 15 degrés à 260 degrés
- Peinture E-coated pour une finition durable qui résiste aux environnements extérieurs
- Pièce détachée 100% reutilisable
- Peut être utilisé avec des conduits EMT 3/4″ grâce au EMT-ADPTR34
En stock, expédié le lendemain!
Poids | 0.6 livres |
---|---|
Utilisation prévue | Pour des conduits EMT (3/4 po), Pour des tubes tinktube (1 1/16 po) |
Longueur en pouces | 3 1/2 po (89 mm) |
Largeur en pouces | 1 5/16 po (33 mm) |
Hauteur extérieure en pouces | 5 7/16 po (138mm) |
Épaisseur de l'acier | 1/8 po (2.5 mm) |
Matériel | Acier roulé à chaud (SPHC) |
Finit | Brillant |
Traitement de l'acier | Electrodéposition cathodique noire (Ecoating) |
Réutilisable | Oui |
Résistance UV | Haute |
Résistance à la corrosion | Haute |
Recyclable | Oui |
Température de fonctionnement du système | -148°F to 572°F (-100°C to 300°C) |
Compatibilité avec tube EMT de 3/4″de pouce | Oui, avec un EMT-ADPTR34 |
Compatibilité avec tube EMT de 1/2″de pouce | Non |
Compatibilité avec tube EMT de 1 pouce | Non |
12 avis pour Ensemble angle pivotante prolongées noir
Show only reviews in Français (3)
Vous devez être connecté pour publier un avis.
Téléchargez la bibliothèque de fichiers 3D en format Step pour dessiner votre projet tinktube dans votre logiciel de CAO préféré
Neal R. (client confirmé) –
Rigid, versatile, re-tinkable
ANDRE LEFEBVRE (client confirmé) –
Assemblage facile !
Armando Amezcua (client confirmé) –
Cindy R. (client confirmé) –
I purchased this because i did not see the connector to join the pipes. It still worked out perfect for my needs.
Yves Bouchard (client confirmé) –
Alex (client confirmé) –
Pas encore eu la chance de les utiliser.
Achim B. (client confirmé) –
JERRY CASHMORE (client confirmé) –
Anonymous (client confirmé) –
Anonymous (client confirmé) –
The bolts provided are just ever so slightly too short for these to work reliably with standard 1 – 1/16″ (OD) EMT tubing. I had to use channel grip pliers to squeeze the ends together while threading the bolt into the nut. The provided nuts have a small threaded extension to provide greater grip, but because the bolts are so short, that thin walled threaded extension on the nut is in tension before the bolt has threaded all the way into the nut. This caused the nut to snap in two on several attempted installations on several different types of connectors. This would be remedied if the provided bolts were a mere 1/4″ longer.
Éric (store manager) –
Thank you for your review. I’m very sorry that you had a bad experience connecting tinktube on a 1″ EMT tubing. Our connectors and accessories are 100% compatible with our 1-1/16″ tinktube pipes but not with the standard 1″ EMT conduit that you’ll find at hardware store. We will do a better job on explaining it on our Website, thanks to your comment. Please contact us at [email protected] to try our 1-1/16″ galvanized pipe which is cheaper inch for inch than a standard 1″ EMT conduit.
Jonathan (client confirmé) –
Anonymous (client confirmé) –
Great adjustability.